Product name: Tire air nozzle lamp color: blue / red / green / pink purple / multicolour
Material: ABS / ABS water size: 38MM length
characteristic:
1. This valve lamp adopts a new photosensitive original. Drive bright, stop and go out
2. Waterwash in rainy days (no disassembly)
3. Road surface distribution, high-speed driving is not afraid of falling off
4. New and upgraded two light sources, with better effect and enhanced brightness.
(1: The air hot wheel is composed of three ag10 batteries (independent). When installation, correctly align the positive poles and
Negative pole, while the wordless end faces the spring
2: Be sure to put the battery in black
Internal insulation leather cover, do not expose, otherwise the battery and the lamp shell metal short circuit, resulting in the battery discharge and heat, the battery power off within a few minutes.
3: Be careful when turning the lamp head. Make sure the metal strip in the lamp head edge gap is in good contact with the metal base (for example, if the metal is too close to the inside, you can manually pull out a little bit, but it must be light!）
4: If the air hot wheel is not bright under normal circumstances, adjust the length of the spring to ensure full contact with the battery (do not use too much force, easy to cause the spring to fall off), otherwise it will not be bright.)
.png?w=1000&h=500)
.jpeg?w=800&h=800)
